Connecting The Pc To A Television; Connecting A Recording Source / Video Inlet; Usb/Ieee 1394 - Medion PC Manual

C
ONNECTING THE
D i a g r a m r e f e
D i a g r a m r e f e
If your computer's VGA card is equipped with a TV-Out
socket you can establish a connection to a TV. You can use
ether a cinch an S-Video or optionally a SCART cord.
NOTE: These sockets are only for output
purpose.
1. Connect your PC and your television with the cord
required (available separately) for your TV.
C
ONNECTING A RECORDING SOURCE
D i a g r a m r e f e
D i a g r a m r e f e
Your PC may be fitted with a TV-input, depending on the
model you selected. You can transfer data from your video
camera to your PC and edit the images using this connection.
1. Connect the plug of the cord to the jack (position K
for cinch and L for S-Video).
ATTENTION: These two front connectors
cannot be used simultaneously.

USB/IEEE 1394

Warning: Connect your USB-/IEEE 1394 de-
vices after initial set-up of your new PC. This
will prevent unnecessary confusion during in-
stallation. These devices can generally be con-
nected during operation. Read the manual for
your peripheral device first.
The voltage outputs of your PC for IEEE 1394 as well as for
USB are protected by a fuse (limited power source according
to EN60950). This ensures that a malfunction of the PC will
not damage the peripheral devices connected to the respec-
tive jacks.
PC
TO A
r e n c e : V ( C i n c h
r e n c e : V ( C i n c h
r e n c e : K ( C i n c h
r e n c e : K ( C i n c h
C
C
O N N
O N N
T
ELEVISION
) , V 2 ( S - V i d e o
) , V 2 ( S - V i d e o
/ V
IDEO INLET
) , L ( S - V i d e o )
) , L ( S - V i d e o )
E C T I N G
E C T I N G
) , V 3 ( S C A R T )
) , V 3 ( S C A R T )
25