Information About The Regulatory Compliance Of The Modem; Information About The Regualtory Compliance Of Wireless Keyboard / Mouse, Bluetooth And Wireless Lan; Fcc Compliance Statement - Medion PC Manual

I
NFORMATION ABOUT THE REGULATORY COMPLIANCE OF THE
MODEM
This PC, if equipped with a modem, has been tested according and
complies with the European regulatory guidelines for radio equip-
ment and telecommunication installations (R&TTE 1999/5/EG).
The modem meets the requirements of TBR21 (01/1998) and
EG201120/V1.1.1/01/98 regarding connection with an analog tele-
phone network.
I
NFORMATION ABOUT THE REGUALTORY COMPLIANCE OF
WIRELESS KEYBOARD
The following low power radio equipment, which has separately
been tested and approved according R&TTE guideline (1999/5/EC),
is bundled with this PC:
-Wireless keyboard / mouse / receiver
-Wireless LAN
These radio devices are marked individually with the CE mark. The
declarations of conformity of these radio devices are available under
www.medion.com/conformity.
FCC C
OMPLIANCE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. Shielded
interface cables, if any, must be used in order to comply with the emission
limits.
/ , B
MOUSE LUETOOTH AND WIRELESS
S
TATEMENT
C
C
U S T O M E R
U S T O M E R
S
S
E R V I C E
E R V I C E
LAN
87