Connecting The All-In-One Pc To A Television; How To Connect The All-In-One Pc To A Television - Medion The Touch X9613 User Manual

OSD Timeout
Reset

Connecting the All-In-One PC to a Television

By means of the HDMI-Out output at the left side of your All-In-One PCs, you transfer the
picture of your All-In-One PC to an external device (TV or beamer).
Note
You will need a HDMI cable for connecting your device to the PC according
to the equipment. This is not included in the scope of the delivery, but it can
be obtained through a specialist shop.
Read precisely which cable you need in the Operating Instruction of your TV
device.

How to Connect the All-In-One PC to a Television

Note
To use the TV function you must first connect the TV to the graphics card
before starting up the All-In-One PC!
1. Shut down Windows and power off the All-In-One PC.
2. Connect the HDMI input on your device to the corresponding output on your All-
In-One PC.
3. Switch on the television to see the PC image on your TV set.
4. Start up the PC and wait for Windows to fully load.
5. In the „Appearance and
6. End configuration by clicking on „OK".
- 52 -
You can set the time here, after which the OSD menu
will close automatically.
Set the OSD values back the to the delivery status
through this. All the OSD settings made will be re-
moved.
Personalization" program set up the configuration.
AV inputs and outputs