Table of Contents
Advertisement
Use safety equipment.
5.
shoes, hard hat, or hearing protection must be used for appropriate conditions.
Always wear ANSI-approved safety goggles when working with this tool.
Use clamps (not included) or other practical ways to secure and support the
1.
workpiece to a stable platform. Holding the workpiece by hand or against your
body is unstable and may lead to loss of control.
2.
Do not force the tool.
will do the job better and safer at the rate for which it is designed.
3.
Do not use the power tool if the trigger does not operate it.
be controlled with the trigger is dangerous and must be replaced.
Remove the battery from the tool and set the Rotation Button (9) to the cen-
4.
ter, locked position, before making any adjustments, changing accessories,
or storing the tool. These preventive safety measures reduce the risk of starting
the tool accidentally.
Store idle tools out of reach of children and other untrained persons.
5.
are dangerous in the hands of untrained users.
Maintain tools with care.
6.
maintained accessories with a sharp cutting edge are less likely to bind and are
easier to control. Do not use a damaged tool or accessory. Tag damaged tools
"Do not use" until repaired.
7.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
8.
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
1.
Tool service must be performed only by qualified repair personnel.
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. follow instruc-
2.
tions in this manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury.
for technical questions, please call 1-800-444-3353.
SKU 65949
Always wear eye protection. Dust mask, nonskid safety
Tool Use and Care
Use the correct tool for your application. The correct tool
Keep drill bits (not included) sharp and clean. Properly
Service
Any tool that cannot
Tools
Service or
PAGE 4
Hide quick links:
Advertisement
Table of Contents
