Siemens WDI1442 Instruction Manual And Installation Instructions page 19

Start M button
Pausing the programme
Stopping the programme
Quick I button
Delay W button
Reset Delay time
Press this button to start the selected programme.
The M Start LED is constantly on from the start of the
programme until the end.
Press the M Start button while the programme is
running, and keep it pressed until STOP appears in
the display (approx. 3 seconds). While the programme
is paused the LED M Start flashes, with STOP and
--- alternating in the display.
To resume the programme, press the M Start button
again.
Press the M Start button while the programme is
running, and keep it pressed (approx. 8 seconds) until
0000 appears in the display.
This button reduces the overall duration of the
programme cycle (washing, rinsing, spinning). This
function is suitable for washing smaller loads or lightly
soiled items in a shorter time.
Not suitable for programmes with pre wash.
Not possible with wool and delicates washing
programmes.
You can set a delay period, in hours, before the
programme is to start. Press the delay W button
repeatedly until the required number of hours is
displayed.
The default value is 0 hours, 0 minutes. Each time the
button is pressed the delay is increased by 1 hour, up
to 12 hours, and by 2 hours for the subsequent
12 hours, up to 24 hours.
Press the delay W button for approx. 3 sec..
After setting the start time, press the M Start button.
The delayed start time countdown begins.
The start W LED lights up while the start time is selec
ted and remains on until the programme starts.
The delay W LED monitor flashes.
Once the set delay period has passed, the selected
programme begins.
19