Table of Contents
Advertisement
First wash
12
The washer dryer was tested before leaving the facto
ry. To remove any residual test water, wash the first
time without any laundry.
q Check that the transport protection devices and
cross pieces have been removed from the back of
the washer dryer.
q Do not load any laundry.
q Close the door.
q Open the water tap.
q Pull out the detergent drawer all the way.
q Put half a measuring cup of normal detergent into
dispenser 2.
i Do not use any special detergents for woollens or
delicates (foam formation).
q Close the detergent drawer.
q Set the programme selector to the required pro
gramme, e.g. Æ cotton 60 °C.
q Press the M Start button.
q When the programme has ended, set the pro
gramme selector to the = off position.
q Open the door.
i Leave the door ajar in order to allow the inside of
the washer dryer to dry.
Hide quick links:
Advertisement
Table of Contents
