Gigaset A110 Manual page 14

Operation on a PABX
The following settings are only necessary if your PABX requires them, please
refer to the operating instructions for your PABX.
c
g
either ...
s
[______________________________________________]
DIAL MODE
s
[______________________________________________]
PULSE
or ...
s
[______________________________________________]
PULSE PAUSE
s
[______________________________________________]
2 - 1
or ...
s
[______________________________________________]
TBR
s
[______________________________________________]
180 MS
a
Restoring the unit to the factory settings
Handset
g
s
[______________________________________________]
HS RESET
s
[______________________________________________]
RESET YES?
Press the talk key.
Open the menu.
Changing the dialling mode:
g
Confirm.
g
Select the required dialling mode and
confirm.
Change pulse pause ratio:
g
Select the menu item and confirm.
g
Select the desired pulse pause ratio and
confirm (1.5:1 or 2:1).
Setting flash times:
g
Select the menu item and confirm.
g
Select the desired flash time and
confirm.
Press end call key.
Open the menu.
g
Select the menu item and confirm.
g
Select the menu item and confirm. The
default settings of the handset are
restored.
12