Using Several Handsets; Locating A Handset ("Paging") - Gigaset A160 User Manual

If you have requested CNIP, you
Show Name
can show the name and town
that are registered for your phone
number with your network pro-
vider.
Caution! All old and new entries
Delete List
will be deleted.
Calling back a caller from the list
¢
f
CallsList 01+02
¢
c
Automatic network provider code
(preselection)
◆
See Menu tree, page 10.
Assigning key 1 for speed dial to the
answering machine (network mailbox)
Simply press and hold key
you will be connected directly to the answering
machine (network mailbox).
See Menu tree, page 10.
Registering corresponding
handsets
You can register up to four handsets to your base
station.
For automatic registration of handsets to
Gigaset A160/A260, see page 3.
Manual registration of handsets to A160/A260
1. On the handset:
MENU
¢ ¢ ¢
OK
Handset
system PIN of the base station (default is 0000)
¢
OK.
flashes in the display.
Registering
2. On the base station: within 60 sec. of entering
the system PIN, press and hold the registration/
paging key (page 1). (min. 1 sec.).
Registration can take up to 5 minutes.

Locating a handset ("Paging")

You can locate your handset using the base station.
◆ Briefly press the registration/paging key on the
base station(page 1).
◆
All handsets will ring at the same time ("pag-
ing"), even if the ringtones are switched off.
End paging: briefly press the register/paging key
on the base station (page 1) or the talk key
a handset.
¢ ¢
u
OK (Select entry)
1
on the handset and
¢ ¢
OK
Settings
¢
Enter the
Register HS
c
6

Using several handsets

Making internal calls
Internal calls are no-cost calls to other handsets
that are registered to the same base.
Press the INT display key. All handsets are called.
When an internal participant answers you can
speak to them. To end the call, press
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the INT display key. All handsets are
called. The external participant hears the hold
music.
◆
Before the internal participant has answered,
press the end call key
to the participant who answers the call.
◆
After the internal participant has answered,
you can talk to him. Press the end call key
the call is forwarded, or press the
you are reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal
caller can listen in on this call and take part in the
conversation. All the participants are made aware
of the 'listening in' by a beep.
Precondition: The Listening in function must be
activated.
Activating/deactivating internal listening in
¢
MENU Settings
¢
Listening in
A 3 1 0 0 8 - M1 8 0 1 - L 1 0 1 - 1 - 7 6 1 9
Issued by
Siemens Home and Office
Communication Devices GmbH & Co. KG
Schlavenhorst 66
D-46395 Bocholt
© Siemens Home and Office
Communication Devices GmbH & Co. KG 2006
All rights reserved. Subject to availability.
on
Rights of modification reserved.
www.siemens.com/gigaset
a
a
; the call is forwarded
"
display key;
¢ ¢ ¢
OK
Base
¢
‰
OK ( = on)
.
a
;
OK