Gigaset A345 Manual page 19

Operation on a PABX
The following settings are only necessary if your PABX requires them. Please
refer to the operating instructions for your PABX.
LO
either ...
or ...
or ...
I
Restoring the telephone to the factory settings
Handset
When you restore the factory settings, the mobile phone is de-registered and
you must re-register it on your base (see page 4).
HS RESET
RESET YES?
or ...
RESET NO?
Initiate the procedure.
Set flash times:
Enter the desired flash time and confirm.
1 = 80 ms; 2 = 100 ms; 3 = 120 ms; 4 = 180 ms;
5 = 250 ms; 6 = 300 ms; 7 = 600 ms.
Change the dialling mode:
Enter the desired dialling mode and confirm.
1 = MFV; 2 = IWV.
Change the pulse-pause ratio:
Enter the desired pulse-pause ratio and confirm.
1 = 1,5:1; 2 = 2:1.
Open the menu.
Select the menu item and confirm.
Select the menu item and confirm.
appears in the display and you hear
SAVED
the confirmation tone. The factory settings
have been restored.
Confirm.
17