Settings (Base) - Gigaset A280 User Manual

Changing the handset name
You can change the default name of the handset
f
¢ ¢
(default: Gigaset). Maximum characters: 10.
|
¢ ¢
PERSONAL SET
HANDSET NAME
{
The current name is shown, last character flashing.
¤
~
|
Use as backspace.
¢
(enter name)
You will find information on multiple line input in the
appendix to this user guide,
Changing the ringer volume
You can choose between 5 sound levels for the ringer
volume; –
LEVEL 1 LEVEL 4
f
¢ ¢
).
LEVEL 2
|
¢ ¢
PERSONAL SET
|
¢ ¢
HANDSET TONE
RING VOLUME
The currently set ringer melody is played with current
p
¢
volume.
(select volume level)
If the ringer is deactivated, the
the display. The handset will ring at
base is paging it.
*
You can also deactivate the ringer completely using
the key.
Changing the ringer melody
You can choose between 10 ringer melodies
f
¢ ¢
(default: MELODY 1 ).
|
¢ ¢
PERSONAL SET
|
¢ ¢
HANDSET TONE
p
¢
RING TONES
(select melody)
The selected melody is played.
¤
To confirm a selected melody
Setting the key beep
Your telephone will beep whenever a key on the
handset is pressed. You can deactivate this acoustical
f
¢ ¢
signal (default: ).
ON
|
¢
PERSONAL SET
|
¢ ¢
TONE
p
¢
KEY BEEP
(select or
ON OFF
Activating/deactivating auto answer
If you activate this function, when you receive a call
you can simply lift the handset out of the charging
f
¢ ¢
cradle without having to press the talk key
|
¢
PERSONAL SET
p
¢
(select or
ON OFF
|
¢
page 25.
and (default:
RINGER OFF
|
|
¢
Ú
icon appears in
when its
LEVEL 2
|
|
¢
|
¢
HANDSET
|
¢
)
c
|
¢
AUTO ANSWER
|
¢
)
18
Setting date and time
f
¢
¢
CLOCK/ALARM
~
¢
DATE & TIME
~
¢
(enter date: MM/DD)
(enter time: HH:MM, 24hrs format) {
¤
Use
Please note
Once the date and time are set, if there is a power
cut of the mains, you should reset date and time.
Setting the alarm clock
You can set an alarm clock on the handset.
Precondition: The date and time have already been
set, see above.
An alarm will sound for 1 minute at the set time once
f
or daily. ¢
p
¢
CLOCK/ALARM
(select
~
If you select
{
(enter time: HH-MM, 24hr format)
¤
Use
If the alarm is activated, the
display. During the alarm --ALARM-- is flashing on the
display.
¤
To cut off the alarm press any key on the keypad.
Setting the alarm melody
You can choose from 3 alarm melodies (default:
f
¢ ).
MELODY 1
¢
CLOCK/ALARM
p
¢
ALARM TONE
(select melody)
The selected melody is played.
¤
To confirm a selected melody

Settings (base)

Setting date and time
Ì
press and hold.
The display shows the date and time fields. The next
~
position to be filled in will flash.
(enter time (HH-MM) and date (MM/DD))
¤
To correct your input backspace with Ì
¤
Press
.
|
¢
|
¢
|
¢
as backspace.
|
¢ ¢
ALARM
ON ONCE or ON DAILY
or
ON ONCE ON DAILY
¼
as backspace.
icon appears in the
|
¢
|
¢
¢
to save the new clock settings.
|
¢
|
¢
|
¢
or OFF )
|
¢
|
Ô
.