Making Internal Calls (Base); Settings; Settings (Handset) - Gigaset A280 User Manual

Transferring a call to another handset
k
You can transfer an external call to another handset.
~
k
Press and hold ¢ (put external call on hold)
(enter internal number of participant)
a
You are connected with the internal participant.
(transfer external call to internal participant)
Conference call
When you are speaking to an external participant, an
internal caller can listen in on this call and take part in
a conference call.
Starting a conference call k
~
k
Press and hold ¢ (put external call on hold)
(enter internal number of participant)
k
You are connected with the internal participant.
Press and hold (start conference)
Ending a conference call
¤
Press the end call key
If an internal participant presses the end call key
the other handset remains connected to the external
participant.

Making internal calls (base)

Calling all handsets
Ë
¤
Press . All handsets will be called.
The first handset accepting the call is connected. Call-
ing all other handsets is aborted.
Accepting internal call
ª
(pick up receiver) or press
¤
To end the call, replace the receiver or press
Incoming call during internal call
An incoming external call during an internal call is
indicated by an acoustic signal.
¤
ª d
Replace the receiver to exit the internal call.
or (accept external call)
Internal consultation calls
When you are speaking to an external participant,
you can call an internal participant at the same time
Ë
for consultation.
(put external call on hold)
All handsets will be called. The first handset accepting
Ë
the call will be connected.
(toggle between internal and external partici-
pant)
a
.
d
. d
17
Transferring an external call to a handset
Ë
You can transfer an external call to a handset.
(put external call on hold)
All handsets will be called.
Replace receiver or press
internal participant)
The first handset accepting the call is connected.
Conference call
When you are speaking to an external participant, an
internal caller can listen in on this call and take part in
a conference call.
Ë
Starting a conference call
(put external call on hold)
All handsets will be called. The first handset accepting
the call is connected.
Press and hold
Ending a conference call
¤
a
Replace receiver or press
,
If an internal participant presses the end call key
the other handset remains connected to the external
participant.

Settings

Settings (handset)

Your handset is preconfigured, but you can change
the settings to suit your individual requirements.
¤
f To change the handset settings use the menu.
¢
PERSONAL SET
.
HANDSET NAME
HANDSET TONE
AUTO ANSWER
f
¢
CLOCK/ALARM
DATE & TIME
ALARM
ALARM TONE
d
(transfer external call to
Ë
(start conference)
d
.
Change handset name.
Change ringer volume and key
beep.
Activate/deactivate auto answer.
Set date and time.
Set an alarm clock.
Set a melody for the alarm clock.
a
,