Phone Identity - Siemens A56i User Manual

A56I USA am, A31008-H5320-A220-2-4A19 (4. February 2004, 17:17)
68
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p
Condition set.
o
Not set.
Display, if status is un-
known (e.g. on a new
SIM card).
Clear all
All set diversions are cleared.
Note
Note that the call forward is stored in the
network and not in the phone (when the SIM
card is changed for example).
Check condition or delete it
First select the condition.
§Select§ Press.
Check status Select
or
Delete Select.
Reactivate call forward
The last call forward has been stored. Pro-
ceed as with "Set forward". The stored
phone number is displayed. Confirm
number.
Edit phone number
Proceed as with "Set forward". When the
stored number is displayed:
§Delete§ Press. The phone number is
deleted.
Enter new number and confirm.
Setup
K
§Menu§
K
Fact. settings
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card and network settings).
Alternative input in standby mode:
*
# 9 9 9 9 #
L

Phone identity

The phone ID (IMEI) is displayed. This
information may be useful for cus-
tomer service.
Alternatively enter in standby mode:
*
# 0 6 #
K
Setup Device
Select a function.
A