De-Registering Handsets; Using Several Handsets; Locating A Handset ("Paging"); Making Internal Calls - Gigaset A385 User Manual

~
(Dial your own number) ¢ while listening to your
announcement: press the
PIN
The following keys are used for operation:
A
Go to the start of the current message.
Press twice to go back to the previous mes-
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Activating the answer machine
~
(Enter your own number and allow the phone to ring
until you hear the message: "Please enter PIN") ¢
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deacti-
vated remotely.
Locating a handset
("paging")
You can locate your handset using the base station.
u Briefly press the registration/paging key on the
base station (¢ page 1).
u All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
End paging: briefly press the register/paging key on
the base station (¢ page 1) or the talk key
handset.
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset A38H) recommended).
Please note:
Each additional handset must be registered on the
base station in order for it to work properly!
For automatic registration of handsets to
Gigaset A380/A385, see ¢ page 5.
Manual registration of handsets to
Gigaset A380/A385
MENU ¢ Settings ¢ OK
1. On the handset:
¢ Handset ¢ OK ¢ Register HS ¢ Enter the system PIN
of the base station (default is 0000) ¢ OK
Registering flashes in the display
2. On the base station: within 60 sec. of entering the
system PIN, press and hold the registration/paging
key (¢ page 1) (min. 3 sec.).
Registration takes approx. 1 minute.
9
key and enter the system
~
c
on a
.
.
10

De-registering handsets

Handsets can only be de-registered by resetting the
base station to its default settings. This will also reset
every other setting ¢ page 11.
If you have only registered handsets for other GAP-
compatible devices, these can only be de-registered
with a hardware reset ¢ page 11.

Using several handsets

Making internal calls

Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
~
u ¢
(1...4, enter internal number of the
INT
handset) ¢
OK
P
u ¢ star key
INT
When a participant answers you can speak to them.
To end the call, press
, the handset is called or
¢
, all handsets are called.
OK
a
.