The Pc Card Slot; Memory Card Slot - MAXDATA ECO 4200X User Manual

The PC Card Slot

The computer is equipped with a PC card slot. This is a PCMCIA 3.3 V/5 V slot of type I/II/III.
To insert a PC card, push it into the slot until it locks into place. Make the connection you
require (for example, network connection).
Consult the documentation from the relevant card.
To remove the card, push the eject button next to the slot.
This causes the button to pop out. Push it again to eject
the PC card.
Figure 17
UK

Memory Card Slot

The computer is provided with a combination slot. This slot accepts memory sticks and SD
(secure digital) cards.
Insert these cards into the slot with the printed side upwards.
After the card snaps into place, it is recognized as an additional drive and you can access
the data.
To remove the card, simply pull it out.
Never remove the card while writing or reading data.
DO NOT use the "Safe-
ly Remove Hardware"
function to remove
the memory card! In
this case, you have to
restart the system to
Figure 18
reactivate the combo
slot.
MAXDATA Notebook Eco 4200X 81