The Pc Card Slot; The Memory Card Slot - MAXDATA PRO 8100 IS User Manual

The PC Card Slot

The computer is provided with a PC card slot. This is a PCMCIA 3.3 V/5 V slot, Type II.
To insert a PC card, push it into the slot until it locks into place.
Set the connection you require (e.g.
network connection).
You can also consult the documents
for the relevant card.
To remove the card, push the eject
button next to the slot. The button
will pop outwards. Pressing the slot
again releases the PC card.
UK
Fig. 17

The Memory Card Slot

The computer is provided with a combination slot. This slot accepts Memory Sticks, SD
(Secure Digital), SM (Smart Media) and MMC (Multimedia card) cards.
Insert these cards into the slot holding the printed side upwards. After the card is inserted
correctly into place, it is recognized as an additional drive. The data on the card can then
be accessed.
To remove it, simply pull the card out.
Never remove the card while data is being read from or written to the card!
DO NOT use the "Safely Remove Hardware" function to remove the memory card! In this
case always restart the system to reactivate the combo slot.
Fig. 18
MAXDATA Notebook PRO 8100 IS 79