Table of Contents
Advertisement
Fault Diagnosis and Troubleshooting
If a problem occurs while working with your computer, first of all try using the following
information to solve the problem. If the problem cannot be solved in this way, you can find
additional information in the advanced service handbook (on the device drivers and utilities
CD-ROM). If the problem persists, switch off the system for several minutes and then restart
it. You will lose all unsaved data, but the system may work properly again. Subsequently
contact your dealer or customer support agent.
Despite pressing the power switch the computer remains switched off.
Possible cause of the problem:
•
The battery is missing or is incorrectly installed.
Note:
•
The power on LED is not lit.
Troubleshooting:
•
Make sure that the battery is in the battery compartment and is inserted properly.
•
Check that the battery terminals are making direct contact.
•
Connect your notebook to the power adapter so that the battery (if present) can
recharge.
Possible cause of the problem:
•
Battery level low.
Note:
•
The battery display LED flashes.
Troubleshooting:
•
Operate the computer using the power adapter. If the system does not immediately
start up, switch off the computer and then restart it.
The screen is not working.
Possible cause of the problem:
•
The energy saving mode is activated.
Note:
•
The suspend LED flashes.
Troubleshooting:
•
Press the on/off button.
Possible cause of the problem:
•
The screen settings are incorrect.
Troubleshooting:
•
Press the spacebar, several times if necessary.
•
If an external monitor is connected, switch it on.
MAXDATA Notebook PRO 8100 IS
UK
87
Advertisement
Table of Contents
