Table of Contents
Advertisement
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Preconditions:
◆
¢
You have set a system PIN other than 0000
page 15.
◆
The phone you are using for remote operation has
touch tone dialling (DTMF), i.e. you hear different
tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number)
announcement: press the
PIN
The following keys are used for operation:
A
Go to the start of the current message.
Press twice to go back to the previous mes-
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Activating the answer machine
~
(Enter your own number and allow the phone to ring
until you hear the message: "Please enter PIN")
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deacti-
vated remotely.
Locating a handset
("paging")
You can locate your handset using the base station.
◆
¢
Briefly press the registration/paging key on the
base station (
page 1).
◆
All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
¢
End paging: briefly press the register/paging key on
the base station (
page 1) or the talk key
handset.
¢
while listening to your
9
key and enter the system
¢
c
on a
10
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset A68H) recommended).
Please note:
Each additional handset must be registered on the
base station in order for it to work properly!
For automatic registration of handsets to
Gigaset A680/A685, see
Manual registration of handsets to
Gigaset A680/A685
¢
1. On the handset:
¢
Handset
tem PIN of the base station (default is 0000)
Registering flashes in the display
2. On the base station: within 60 sec. of entering the
¢
system PIN, press and hold the registration/paging
key (
page 1) (min. 3 sec.).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting the
base station to its default settings. This will also reset
every other setting
If you have only registered handsets for other GAP-
~
compatible devices, these can only be de-registered
with a hardware reset
Using several handsets
Making internal calls
Internal calls are no-cost calls to other handsets that
are registered to the same base.
Press the
INT
When an internal participant answers you can speak
to them. To end the call, press
¢
page 5.
¢
¢
¢
MENU
Settings
OK
Register HS
.
¢
page 11.
¢
page 11.
display key. All handsets are called.
a
.
¢
OK
¢
Enter the sys-
.
OK
Advertisement
Table of Contents
