Table of Contents
Advertisement
Changing the nozzles
of the large, medium
and small burners on
the cooktop
Changing double-
flame burner tips
- Remove the pan supports, burner covers and
diffusers.Fig. 7
- Change the nozzles using the spanner provided by our
Service Centre (code 424699), taking special care to
ensure that the nozzle does not fall when it is removed
from the burner or when fitted. Fig. 8.
Ensure that it is completely tightened in order to
guarantee the seal. Primary air adjustment is not
necessary with these burners.
Note: it is not necessary to adjust the primary air control
on these burners.
Fig. 7
The glass panel and frame are fixed to the rest of the
cooktop using a clip mounting system. The following
steps must be taken to remove the glass panel and
frame:
- Remove all the burner covers and pan supports. Fig. 9a.
- Release the front clip fixing the appliance to the kitchen
unit by removing the screw. Fig. 9b.
- Loosen the screws on the burners, Fig. 9c, and remove
the control knobs from their respective housings.
Fig. 9a
Use the disassembly lever 483196 available from our
Service Centre. To release the front clips, apply the lever
in the area shown in figures 10 according to the cooktop
model.
Fig. 10
Fig. 8
Fig. 9b
Fig. 9c
15
Advertisement
Table of Contents
