Tips And Tricks; Timer; Basic Settings; Changing The Basic Settings - Siemens ET475MY11E Instruction Manual

Tips and tricks

When the heating up light goes off, place the food on the
■
appliance. This also applies when raising the temperature to
fry a second item which requires a higher setting.
Press the pieces of meat, poultry or fish flat onto the frying
■
surface using the spatula. Only turn the meat, when it comes
away from the surface easily, in order to protect the structure
of the meat. Damaging the structure can cause juices to
escape and results in the meat drying out.
Keep the pieces of meat, poultry or fish apart so that they do
■
not draw any liquid.

Timer

The timer can be used as a kitchen timer. The timer does not
switch the Teppan Yaki on or off.
With the timer, you can set a time up to 99 minutes. You can
also use the timer when the Teppan Yaki is switched off.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Display Function
Audible signal
™ƒ
‹ Confirmation signal and operation error signal
are switched off.
‚ Only the operation error signal is switched on.
Confirmation signal and operation error signal
ƒ
switched on.*
Duration of the timer end signal
™‡
10 seconds.*
‚
ƒ n 30 seconds.
1 minute.
„
Combination of heating zones
™ˆ
Both heating zones are on when the appliance
‹
is switched on.
Both heating zones are off when the appliance
‚
is switched on.
ƒ The last setting made is retained when the appli-
ance is switched on.*
Reset to basic setting
™‹
Switched off.
‹
‚ Switched on.
* Basic setting
16
Avoid pricking or cutting meat before or during frying, in
■
order to retain meat juices.
Do not salt the food before frying, to prevent liquid and
■
soluble nutrients from escaping.
Turn fish fillets in flour before frying. The fish will be easier to
■
turn.
Turn fish fillets only once if possible. Place fish onto the
■
appliance with the skin facing downward.
Use oil and fat that is suitable for frying, for example plant oil
■
or concentrated butter.
Setting procedure
Touch the 0 symbol until the
1.
lights up on the timer display.
‹‹
Set the desired time in the settings range.
2.
A signal sounds once the time has elapsed.
the timer display. The display switches off after 10 seconds.
To correct the time, touch the
in the settings range.

Changing the basic settings

The Teppan Yaki must be switched off.
Switch on the Teppan Yaki.
1.
Within the next 10 seconds, touch the
2.
seconds.
™ƒ flashes in the left-hand display and
hand display.
Touch the symbol repeatedly until the desired indicator
0
3.
flashes in the left-hand display.
Set the desired value on the settings range.
4.
Touch the symbol for 4 seconds.
0
5.
The setting is saved.
Switching off without saving
To exit the basic setting, switch the Teppan Yaki off with the
main switch. Changes are not saved.
U indicator lights up.
‹‹ lights up on
0 symbol and set the time again
0 symbol for 4
ƒ appears in the right-