Changing The Inner Flame Nozzle; Adjustment Of The Taps - Siemens ER926SB90A User Instructions

Changing the inner flame
nozzle (fig. 12)
Fig. 12
Adjustment of the
taps
- Unscrew the part M3 from the threaded part M2; to do
this, hold the threaded part in the opposite direction.
- Remove the pipe from the part M2. Fig. b2.
- Disassemble the assembly of parts M2 and M4 from
part M1. Fig. b3-b4.
- Remove the inner flame nozzle M4 from part M2.
Fig. b5-b6.
- Screw in the new inner flame nozzle M4. Fig. b6-b7.
Refit all the components, proceeding in the reverse order to
removal.
Set the control knobs to minimum.
Remove the control knobs from the taps. Fig. 13.
It has a flexible rubber valve reinforcing ring. Simply press
on this seal with the tip of a screwdriver to allow access
to the tap adjusting screw.
Fig. 13
17