Advertisement
Quick Links
Shutter mode selector
(Set at "AUTO" for normal operation. For other
settings, press lock button and rotate dial.)
Film advance lever
Exposure counter
Shutter release button. with
cable release socket
Neck strap eyelet
Self-timer lever
Mirror (Delicate, don't touch!) -
"E" lens
mounting index
Automatic aperture coupling lever
-
Hot-stroe/eyepiece cover
Hot-shoe (X-contact)
Film rewind knob with crank
(Pull up to open camera back)
ASA film speed scale
ASA film speed/exposure compensation dial
Exposure compensation scale
Exposure compensation dial lock
Alignment
mounting
index for-
"(lS" lens moun
(also tbr "P" mou
index
a d u p t t : r )
Lens release button
--Flash
X-sync terminal with
safety cover
White !u116n--
APerture ring -
Distance
Focusing
e
Depth-of-field scale
ing
Advertisement
Related Manuals for Mamiya ZE
Summary of Contents for Mamiya ZE
- Page 1 Shutter mode selector (Set at "AUTO" for normal operation. For other settings, press lock button and rotate dial.) Hot-stroe/eyepiece cover Film advance lever Hot-shoe (X-contact) Exposure counter Film rewind knob with crank (Pull up to open camera back) Shutter release button. with cable release socket ASA film speed scale Neck strap eyelet...
- Page 2 Viewfinder eyepiece Film take-up spool Shutter curtains Film advance sprocket (Delicate, don't touch!) Film chamber Mamiya Winder film advance coupling Battery cartridge Mamiya Winder positioning hole Battery car-tlidge release Rewind button Mamiya Winder electrical contacts Tripod socket...
- Page 3 1/30 sec. down to I sec. To shoot at the slow shutter speeds indicated by the 66LT" LED, it is recommended to use either a tripod or the Mamiyalite ZE to prevent blurring. Flashing of any of the shutter-speed LEDs at the rate of 4 times per second in- dicates that the batteries should be replaced.
- Page 4 www.orphancameras.com Match the red dots on the lens If the white button (A) is set at Removing the lens 'mark, and camera body, then rotate the central index Press the lens rele button and lens in the direction of the arrow aperture ring cannot be turned.
- Page 5 Now Carefully and Surely Load a Roll of Film 2. Insert the end of the film into 1. Open the back cover of the 3. First advance film the slot of the film take-up spool. camera by pulling up on the re- operating the film ance lever;...
- Page 6 www.orphancameras.com Don't Forget to Set the Filrn Set the film speed of the film being used by lifting up the outer rim of the film speed dial and rotating until the index indicates the correct ASA value on the film speed scale.