Base Unit Settings - Panasonic KX-TG7150FX Operating Instructions Manual

TG7150-7170FX(e).book Page 21 Wednesday, January 10, 2007 3:32 PM

Base unit settings

L Use the handset to customise the base unit.
L When customising the base unit, the current item or setting is indicated by >.
To customise the base unit:
1
{j/OK}
2
Press {^} or {V} to select "Base Unit Setup". i {>}
3
Press {^} or {V} to select the desired item in the base unit settings menu. i {>}
4
Press {^} or {V} to select the desired item in the sub-menu. i {>}
5
Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the
rightmost column of the chart.
L To exit the operation, press {ih}.
Base unit settings
menu
Ringer Volume
Call Options
Other Options
*1 Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your nearest Panasonic service centre.
Sub-menu Feature (default setting)
— Base unit ringer volume (Medium)
("Tone"): page 12
Dial Mode
Change the recall time ("600 msec.").
Recall/Flash
Change base unit PIN ("0000").
Base Unit PIN
– Enter the current 4-digit base unit PIN.
i Enter the new 4-digit base unit PIN.
i {j/OK}
("Off"): page 25
Repeater Mode
Base Unit Settings
*1
*2
21