Turning The Power On/Off; Symbols Used In These Operating Instructions; Display Language - Panasonic KX-TG7150FX Operating Instructions Manual

TG7150-7170FX(e).book Page 11 Wednesday, January 10, 2007 3:32 PM
Battery strength
Battery icon Battery strength
High
5
Medium
6
Low
7
When flashing: Needs
to be charged.
Panasonic Ni-MH battery performance
(included batteries)
Operation
In continuous use
In continuous
standby mode
Note:
L It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
L Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
L Even after the handset is fully charged,
the handset can be left on the base unit
without any ill effect on the batteries.
L The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.

Turning the power on/off

Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these
Operating time
KX-TG7150: operating instructions
12 hours max.
KX-TG7170:
Symbol
10 hours max.
{j/OK} Press {j/OK}.
150 hours max.
i
" "

Display language

17 display languages are available.
You can select " You can select
"
"
"
"
"
"
1
2
3
4
Meaning
Proceed to the next operation.
Select the words in quotations
shown on the display (e.g.,
"Handset Setup") by
pressing {^} or {V}.
", , "
", , " ", , "
", "Č Š
", , "
", , " ",
Š
", , "
", , " ", , "
", or , or "
{ih} i {j/OK}
Press {^} or {V} to select "Handset
Setup". i {>}
Press {^} or {V} to select "Display
Setup". i {>}
Press {^} or {V} to select "Select
Language". i {>}
Preparation
", ,
",
", ,
Š ", ,
",
".
11