Adding A Satellite Receiver: Connecting To A Television And A Satellite Receiver - Panasonic Diga DMR-EZ48VEB Operating Instructions Manual

Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
"AV1 Output" in the Setup Menu is set to "RGB 1 (without component)" or "RGB 2 (without component)" (
– "AV2 Input" settings in the Setup Menu (
 Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
Be sure to read the Caution for AC Mains Lead on page 3.

Adding a Satellite Receiver: Connecting to a Television and a Satellite Receiver

To household
mains socket
Step
5
To household
mains socket
AC IN AC IN
Step
5
To household
mains socket
 RF coaxial cable (supplied) from the aerial socket or aerial cable to the "RF IN" on the unit.
 RF coaxial cable (supplied, black) from the "RF OUT" on the unit to the "RF IN" on the TV.
 21-pin Scart cable (not supplied) from the "AV1 (TV)" on the unit to the "AV" on the TV.
 21-pin Scart cable (not supplied) from the "AV" on the satellite receiver to the "AV2 (EXT)" on the
unit.
 AC mains lead (supplied) from the "AC IN~" on the unit, the TV and the satellite receiver to a
household mains socket.
After completing the above connections, proceed to the TV Tuning (
To view satellite programmes
Refer to "Watching Satellite Programmes" (
To record satellite programmes
Refer to "Recording from a Satellite Receiver" (
67)
COMPONENT
OUT
VIDEO OUT
Y AV A A 1 AV 1 V
VIDEO
(TV) (TV)
OUT
P
B
S VIDEO
L
AUDIO
AV 2 AV 2 A A
P
R
OPTICAL (EXT) (EXT) T T
R
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Rear of this unit
satellite antenna
Step
5
16)
27)
AV
RF IN
Rear of TV
Step
3
RF RF RF
IN IN IN
RF RF RF
OUT OUT OUT
Step
4
AV
Rear of satellite receiver
Connections other than the 21-pin Scart cable
11).
46).
67)
The RF coaxial cable
cannot be used for showing
pictures from the unit. The
unit must be connected
using another method, e.g.
21-pin Scart cable to show
pictures from the unit on
the television set.
Step
2
To the aerial
Step
1
Use one of the RF
coaxial cable (black or
grey) to connect this
unit's RF IN terminal
to your aerial socket or
( 8)
aerial cable.
71
9
RQT9126