Recording From A Dv Camcorder - Panasonic Diga DMR-EZ48VEB Operating Instructions Manual

Recording from a DV Camcorder

Connect the cable while both the unit and the external
device are turned off.
Front of the unit
IN 2 S VIDEO VIDEO L /MONO AUDIO R
4-pin DV Cable
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Preparation:
 Turn on the unit.
 Insert a disc (
73).
 [RAM] If the disc is protected, release protection
( 60).
 When the output signal from the external device is
NTSC, change the "TV System" to "NTSC" in the
Setup Menu ( 67).
 When recording bilingual programmes (
REC MODE
to select the recording
mode ( 24).
Turn on the DV equipment and
pause play at the point you want
to start recording.
"DV Auto Rec"
screen may appear.
When "DV Auto Rec" screen does not appear
Perform steps – ( above).
1. Press [DRIVE SELECT] to select the DVD drive.
2. Press [FUNCTION MENU].
3. Press [, ] to select "To Others", then press [OK].
4. Press [, ] to select "DV Auto Rec", then press [OK].
You can proceed to step  (
65)
DV Auto Rec
DV unit is connected.
Record from the DV unit?
Rec to DVD Cancel
SELECT
RETURN
OK
right).
 to select "Rec to DVD", then
OK
 to select "Rec", then
Notes
 Only one piece of DV equipment (e.g., digital video camcorder)
can be connected to the unit via the DV input terminal.
 When timer recording starts while recording from an external
device, timer recording takes priority and recording from the
external device stops.
 If the desired audio is not recorded, select the kind of audio for
"Audio Mode for DV Input" in the Setup Menu (
 [RAM] Programmes are recorded as a single item; breaks in the
images create chapters and playlists are created automatically.
 If you use video camcorders from other manufacturers, these are
not guaranteed to work.
 Depending on the DV equipment, the images or audio may not be
input properly.
 The DV input on this unit is for use with DV equipment only.
(It cannot be connected to a computer, etc.)
 It is not possible to operate the unit from the connected DV
equipment.
 The DV equipment name may not be shown correctly.
 Date and time information is not recorded, even if displayed on
the camcorder.
 You cannot record and play at the same time.
Tips
When recording fi nishes
The confi rmation screen appears.
Press [OK] to fi nish DV camcorder recording.
To stop recording
Press [ STOP].
The confi rmation screen appears. Press [OK].
If the DV camcorder recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on. If that does not work, follow the instructions on
page 28
OK
65).
29
RQT9126