Playback Issues: Operation - Panasonic Diga DMR-EZ48VEB Operating Instructions Manual

Playback Issues
The image from this unit do not
appear on the TV.
Play fails to start even when
[ PLAY] is pressed.
Play starts but then stops
immediately.
Audio and video momentarily
pause.
DVD-Video is not played.
Alternative soundtrack and subtitles
cannot be selected.
No subtitles.
Angle cannot be changed.
You have forgotten your ratings
password.
Quick View (Play 1.3) does not
work.
The resume play function
does not work.
The Video CD picture does not
display properly.
Time Slip, Manual Skip, etc. does
not work.
Cannot see the beginning of the
title played.
Operation
 TV is not compatible with RGB signal. Set "AV1 Output" in the connection
menu to "Video (with component)".
 Insert the disc correctly with the label facing up.
 The disc is dirty.
 You tried to play a blank disc or a disc that is unplayable on the unit.
 You tried to play a +RW that needs to be finalised on the equipment used
for recording.
 When recording to DVD-RAM using EP (8Hours) mode, play may not be
possible on DVD players that are compatible with DVD-RAM. In this case
use EP (6Hours) mode.
 You cannot play discs during DV automatic recording.
 This occurs between playlist chapters.
 This occurs as scenes change during Quick View (Play 1.3).
 [-R]DL] [+R]DL] When playing a title recorded on both layers, the unit
automatically switches between layers and plays the title in the same way
as a normal programme. However, video and audio may momentarily cut
out when the unit is switching layers.
 Ensure the DVD-Video region number for the disc is correct, and the disc is
not defective.
 You have set a ratings level to limit DVD-Video play. Change this setting.
 The languages are not recorded on the disc.
 You may have to use the disc's own menus to select languages and audio tracks.
 Subtitles are not recorded on the disc.
 Set "Subtitle" in the Disc menu to "On".
 This function depends on software availability. Angles can only be changed
during scenes where different angles are recorded.
 With the tray open, press [DRIVE SELECT] to select the DVD drive, then
press and hold [ REC] and [] on the main unit simultaneously for about
5 or more seconds.
 This does not work when audio is other than Dolby Digital.
 This does not work while recording in XP or FR mode.
 Memorized positions are cancelled when the tray is opened.
 When connecting to Multi-system TV, select "NTSC" in "TV System" in the
Setup Menu.
 When connecting to PAL TV, the lower part of the picture cannot be
displayed correctly during search.
 These functions do not work with finalised discs.
 Time Slip does not work when the unit's "TV System" settings are different
from the title recorded on the disc.
 (If connecting to a TV that supports VIERA Link with an HDMI cable)
When [ PLAY] is pressed on this unit's remote control, you may not be
able to see the beginning of the title played until the picture is displayed on
the TV. Using [] or [], return to the beginning of the title.
Page
67
73
73
13, 14, 15
−
64
−
−
−
23
Cover,
14
64
−
36
−
58
−
−
−
−
−
67
−
−
67
−
87
RQT9126