Connections - Panasonic KX-TG7210E Operating Instructions Manual

TG7210-7230E(e).book Page 11 Tuesday, October 16, 2007 12:59 PM
Icon Meaning
L Line is being used by
another handset for
calling, registration,
etc.
L Answering system is
being used by another
handset or the base
*1
unit.
*1 KX-TG7230/KX-TG7232/
KX-TG7233/KX-TG7234

Connections

Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly (C).
Base unit
C
C
A
B
USE ONLY the
supplied AC adaptor.
To AC mains outlet
(220–240 V, 50 Hz)
To telephone line
USE ONLY the supplied
cord.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Important:
L If you use a telephone line cord which
is not supplied, the unit may not work
properly.
Charger (KX-TG7212/KX-TG7213/
KX-TG7214/KX-TG7232/KX-TG7233/
KX-TG7234)
B
USE ONLY the supplied
AC adaptor (smaller).
Note:
L Never install telephone wiring during a
Hook lightning storm.
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit will not work during a
power failure. We therefore
recommend you also connect a
corded-type telephone (without AC
adaptor) to the same telephone line
using a T-adaptor. Your Panasonic
sales shop can offer you more
Preparation
C
C
Hooks
To AC mains outlet
(220–240 V, 50 Hz)
11