Table of Contents
Advertisement
Installing the air Filter
Cylinder Head (46)
Figure 2
Thread the Air Filter (45) clockwise
onto the side of the Cylinder Head
(46).
Set up
coupler
Plug
tool
Quick
coupler
Shut
off
oiler
Valve
Quick
coupler
regulator with
Pressure Gauge
Sample air line Setup
Figure 4
1.
Connect a 1/4" NPT air hose to the
Quick Coupler (all sold separately).
The air hose must be long enough
to reach the work area with enough
extra length to allow free movement
while working.
SKU 95386
For technical questions, please call 1-800-444-3353.
Air Filter (45)
coupler
Plug
air Hose
on reel
Filter
air
compressor
2.
Depending on the tool which you will
be using with this compressor, you
may need to incorporate additional
components, such as an in-line oiler,
a filter, or a dryer (all sold separately).
Consult your air tool's manual for
needed accessories.
checking the oil
ImPortant: running the air
compressor with no oil or low
oil will cause damage to the
equipment and void the warranty.
Oil Sight Glass (33)
OIL LEVEL
oVerFIll
Full
loW
Figure 5
1.
The oil level should be at the center
of the "full" level on the Oil Sight
Glass (33), as shown in Figure 5. Add
oil as needed to maintain this level.
Do not let the oil level go below the
center dot (LOW as shown in Figure
5) and do not overfill the oil so that it
is above the center dot (OVERFILL
as shown in Figure 5) on the sight
glass.
2.
To add oil:
a.
Unthread the Oil Plug (31).
b.
Using a funnel to avoid spills,
pour enough premium quality
SAE 30-weight, non-detergent, air
compressor oil (sold separately) into
Crankcase Cover (32)
Page 10
Hide quick links:
Advertisement
Table of Contents
