Table of Contents
Advertisement
Functions
Tank Pressure
Gauge (54)
Drain Valve (65)
air outlet Valve (59)
(toP VIeW)
Oil Plug (31)
Safety Valve
(56)
Figure 1
compressor area Set up
1.
Designate a work area that is clean
and well-lit. The work area must not
allow access by children or pets to
prevent injury.
2.
Locate the Compressor on a flat
level surface to ensure proper pump
lubrication and to prevent damage to
SKU 95386
For technical questions, please call 1-800-444-3353.
ON/OFF Power
Button
(On Pressure
Switch (55))
Regulator
(58)
Air Outlet
Valve (59)
Output
Pressure
Gauge
(60)
cloSed
oPen
connect
aIr HoSe
Here.
Oil Sight Glass
(33)
the unit. Keep at least 12" of space
around the unit to allow air circulation.
3.
Route the power cord from the
compressor to the grounded wall
outlet, along a safe path without
creating a tripping hazard or exposing
the power cord to possible damage.
assembly
attaching the Foot and Wheels
1.
To attach the Foot (66) to the front
bottom of the Air Tank (1):
a.
Using the Bolt/Washer/Nut Assembly
(67), slide a flat washer onto the
Bolt.
b.
Slide the Bolt through the Foot and
the hole in the Air Tank front leg.
c.
Slide a flat washer and the lock
washer onto the bolt and secure in
place with the nut.
2.
To attach the Wheels (5) to the back
bottom of the Air Tank (1):
a.
Slide the Wheel Shaft Bolt (6)
through the Wheel (5), a Flat
Washer (4), and the hole in the leg
of the Air Tank.
b.
Slide the remaining Flat Washer (4)
and Lock Washer (3) onto the Wheel
Shaft Bolt and secure in place with
the Nut (2).
c.
Repeat step (a) and (b) for the other
Wheel.
Page 9
Hide quick links:
Advertisement
Table of Contents
