Specifications; Instructions For Putting Into Use; Compressor Area Set Up - Central Pneumatic 95275 Set Up And Operating Instructions Manual

SPECIFICATIONS

Electrical
120 V~ / 60 Hz / 2.6 A
Requirements
Air Outlet Size 1/4" -18 NPT
Auto Shut-Off @ 100 PSI
Air Pressure
Restart @ 85 PSI
Air Tank Capacity 3 Gallons
0.6 SCFM @ 90 PSI
Air Flow Capacity
1 SCFM @ 40 PSI
Pump Single stage
Line Cord 6' x 18 AWG with 3-prong plug
Thermal Motor equipped with overheat
Protection auto shutdown
NOTE: Allow adequate time when filling tires.
The larger the tire, the more time to fill is
needed.
NOTE: This product is designed for inflation,
stapling, brad nailing and air brushing.
uNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
INSTRuCTIONS FOR PuTTING
INTO uSE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
FROM ACCIdENTAL
OPERATION:
Turn the Switch "OFF", unplug
the Compressor from its
REV 09i
SKU 95275
TO PREVENT
SERIOuS INjuRY
For technical questions, please call 1-800-444-3353.
electrical outlet, and release all
air pressure from the air tank
before assembling or making any
adjustments to the compressor.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Functions
Reset
Button
Tank Air
Pressure
Gauge
Safety
Valve
Regulator
Knob

Compressor Area Set up

1. Designate a work area that is clean and
well-lit. The work area must not allow
access by children or pets to prevent
injury.
2. Locate the Compressor on a flat level
surface to prevent tipping and damage.
Keep at least 12" of space around the
unit to allow air circulation.
3. Route the power cord from the
compressor to the grounded wall outlet,
along a safe path without creating a
tripping hazard or exposing the power
cord to possible damage.
Switch
Output Air
Pressure
Gauge
Air
Outlet
Page 7