Table of Contents
Advertisement
the Pump Crankcase to reach the
"full" level in the Oil Sight Glass.
c.
Replace the Oil Plug.
3.
If uncertain which oil to use for this
compressor, please call Harbor
Freight Tools customer service at
1-800-444-3353 for assistance.
4.
change the compressor oil after
the first hour of use to remove any
debris.
WarnInG! To prevent serious injury from
burns: Do not add or change the oil
while the compressor is in operation.
Allow the compressor to cool before
replacing oil.
Initial run of the air compressor
5.
Break in the new Air Compressor as
follows:
a.
Check the oil level (See Checking
the Oil).
b.
Make sure the Power Button is OFF
and the unit is unplugged. Insert a
male coupler (sold separately) into
the female Quick Coupler and fully
open all regulators and valves.
c.
Plug in the Power Cord.
d.
Turn the Power Switch ON.
e.
Let the unit run for 30 minutes. Air
will expel freely through the Coupler.
f.
Turn the Power Button OFF.
g.
Unplug the Power Cord and remove
the male coupler.
SKU 95386
For technical questions, please call 1-800-444-3353.
Page 11
Hide quick links:
Advertisement
Table of Contents
