Table of Contents
Advertisement
Menu
Item
PRINTING
TRAY
MENU
T-MARGIN
L-MARGIN
AUTO (Factory Default)
1ST
MP
OPT (If the 2nd feeder is installed)
MANUAL
The TRAY setting identifies the default paper tray.
"AUTO" means that the printer feeds print material from the other
tray when one tray is empty. If you are using the same size and type
of print material in all the trays, the trays are automatically linked.
"1ST" means that the printer feeds from the 1st cassette unless it is
empty.
"MP" means that the printer feeds from the MP tray continuously
unless it is empty or closed.
Use the "MANUAL" selection when you want to print envelopes or
other print material one piece at a time through the MP tray. Press
the ON LINE/CONTINUE button on the panel to print another sheet.
"OPT" is available only if the 2nd feeder is installed. See "Installing
the 2nd feeder (500 pages)" on
0.0" to 9.9" (0.0"; Factory Default) (Portrait)
0.0" to 6.5" (0.0"; Factory Default) (Landscape)
The T-MARGIN (TOP-MARGIN) menu item lets you select the top
margin of the print materials. Units are in inches. The maximum
value depends on the "PAPER" item setting (see
0.0" to 6.5" (0.0"; Factory Default) (Portrait)
0.0" to 9.9" (0.0"; Factory Default) (Landscape)
The L-MARGIN (LEFT-MARGIN) menu item lets you select the left
margin of the print materials. Units are in inches.The maximum value
depends on the "PAPER" item setting (see
Value and Functions
page
159.
page
77
Using the Printer
page
75).
75).
Advertisement
Table of Contents
