Table of Contents
Advertisement
Perform the following steps before you start loading paper;
3
a) Press down on the metal plate to lock it into position.
b) Lift the length guide lever and slide the length guide to the "LTR" size
indicated on the bottom of the cassette. The guide will lock into place.
c) Squeeze the width guide and slide it to the far right side of the cassette.
d) Squeeze the envelope guide lever and slide it to the far rear position.
Metal plate
4
Lift the tab of the rear right guide completely and slide it to the desired
paper size until it clicks into place.
The paper size is indicated on the bottom of the cassette.
C
AUTION
•
To prevent any damage to the rear right guide, pull the tab of the rear right guide completely
before slide it.
Length guide
a
Width guide
Rear right guide
b
d
c
Envelope
guide
163
Options
Tab
Advertisement
Table of Contents
