Table of Contents
Advertisement
CONNECTING THE POWER CORD
Use a minimum 25 foot (7.6 m.) long, 16AWG, outdoor
electrical cord when using this unit. Other sizes include:
Cord length (ft)
25
Amperage Rating
Wire size (AWG)
10 to 12 amps
16
WARNING: To reduce the risk of electrical
shock, this unit has a polarized plug (one
blade is wider than the other) and will require
the use of a polarized extension cord. This
unit plug will fit into a polarized extension
cord only one way. If the plug does not fit
fully into the extension cord, reverse the plug.
If the plug still does not fit, obtain a correct
polarized extension cord. A polarized
extension cord will require the use of a
polarized wall outlet. This plug will fit into a
polarized wall outlet only one way. If the
plug does not fit fully into the wall outlet,
reverse the plug. If the plug still does not fit,
contact a qualified electrician to install the
proper wall outlet. Do not change the unit
plug, extension cord receptacle, or extension
cord plug in any way.
1. Secure the extension cord to motor housing as
shown (Fig. 11) to the prevent accidental removal of
the electrical cord.
2. Plug the female end of the electrical cord into the
receptacle at the back of the unit (Fig. 12).
Receptacle
Fig. 12
10
OPERATING INSTRUCTIONS
50
100
150
16
14
12
Fig. 11
STARTING AND STOPPING THE BLOWER/VAC
This unit is equipped with a three way OFF/LOW/HIGH
switch (Fig. 13).
•
Slide the switch all the way down for OFF.
•
Slide the switch up to the first click for LOW.
•
Slide the switch up to the second click for HIGH.
Fig. 13
HIGH
LOW
OFF
Hide quick links:
Advertisement
Table of Contents
