Ryobi RBV26GN Operator's Manual

Ryobi RBV26GN Operator's Manual

Operator’s manual

Advertisement

RBV26GN
BLOWER / VACUUM
OPERATOR'S MANUAL
WARNING!
It is essential that you read the instructions in this manual before assembling, operating and
maintaining this product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RBV26GN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ryobi RBV26GN

  • Page 1 RBV26GN BLOWER / VACUUM OPERATOR’S MANUAL WARNING! It is essential that you read the instructions in this manual before assembling, operating and maintaining this product.
  • Page 2: General Safety Warnings

    Do not operate in poor lighting. The operator requires a WARNING clear view of the work area to identify potential hazards. When using the product, the safety rules must be followed. Use of hearing protection reduces the ability to hear For your own safety and that of bystanders, please read warnings (shouts or alarms).
  • Page 3: Intended Use

    in certain individuals. Symptoms may include tingling, can work close to the ground. numbness and blanching of the fingers, usually apparent Do not place blower on top of or near loose debris. Debris upon exposure to cold. Hereditary factors, exposure to may be sucked into intake vent resulting in possible cold and dampness, diet, smoking and work practices damage to the product.
  • Page 4: Product Specifications

    Read this safety and operating CAUTION: instructions in this booklet and keep it in a Indicates a potentially hazardous situation, which, if not safe place for future reference. avoided, may result in minor or moderate injury. CAUTION: Beware of thrown or flying objects. Keep (Without Safety Alert Symbol) Indicates a situation that all bystanders at least 15 m away.
  • Page 5 The cruise control feature allows the user to operate the blower without holding the throttle trigger. To slow the engine, If any parts are damaged or missing, please call Ryobi simply push the cruise control lever forward. customer service for assistance.
  • Page 6: Operation

    50:1 ratio. Rotate the vacuum bag until the shoulder strap is upright. NOTE: We recommend you use Ryobi synthetic 2-stroke Make sure the vacuum bag is zipped and closed before lubricant. Only use a quality synthetic 2-stroke lubricant in starting the product.
  • Page 7: Filling The Tank

    TO MIX THE FUEL: Pre-mix unleaded petrol and 2-stroke engine lubricant in the problem before using the product. Failure to do so could a clean container approved for petrol. This engine is certified to operate on unleaded petrol intended for automotive use with an octane rating of 91 STARTING AND STOPPING ([R + M] / 2) or higher.
  • Page 8: Cruise Control

    the upper handle in your left hand and the vacuum handle of a pile. in your right hand. Operate power equipment at reasonable hours only - not Move the blower/vacuum from side to side along outer early in the morning or late at night when people might be edge of the debris.
  • Page 9: Fuel Filter

    Wash the bag in soapy water at least once a year. To obtain a replacement bag, see your local Ryobi dealer. Visit our website for your nearest location or call Ryobi Customer Service on 1300 361 505.
  • Page 10: Troubleshooting

    TROUBLESHOOTING IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORIZED SERVICING DEALER. PROBLEM CAUSE REMEDY Engine fails to start. No fuel in tank. Fill tank. Spark plug is fouled. Replace spark plug. Spark plug is broken. (cracked Replace spark plug. porcelain or electrodes broken) Ignition lead wire shorted, broken, or Replace lead wire or attach to spark...
  • Page 12 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 960606013-01...

Table of Contents