Connect A Wireless Usb Adapter; Use Your Home Theater; Before You Start; Access The Home Menu - Philips HTS5220 User Manual

Set up network
1
Connect to a network router through
wired or wireless network connection (see
'Connect to a computer network and the
Internet' on page 10 ) .
2
Turn on your TV and switch to the correct
source for the home theater.
3
Press ( Home ).
4
Select [Setup] , then press OK .
5
Select [Network Setup] > [Network
Installation] , then press OK .
•
For wired network, select
(Ethernet)] and press OK .
•
For wireless network, select
(Wi-Fi)] and press OK .
6
Follow the instructions on the TV to
complete the setup.
»
The home theater connects to the
internet. If connection fails, select [Retry] ,
then press OK .
7
Select [Finish] , then press OK to exit.

Connect a wireless USB adapter

Purchase a wireless USB adapter (model: PHILIPS
WUB1110) and set up the wireless network (see
'Set up network' on page 11 ) .
5
This section helps you use the home theater to
play media from a wide range of sources.

Before you start

Check that you:
•
[Wired
•
[Wireless

Access the home menu

The home menu gives you easy access to
connected devices, audio and video settings, and
other features.
1
2
Use your home
theater
Make the necessary connections and
complete the setup as described in the
Quick Start.
Switch the TV to the correct source for the
home theater.
Press ( Home ).
»
The home menu appears.
Press the Navigation buttons and OK to
select the following:
•
[play disc] : Starts disc play.
•
[Browse USB] : Accesses the content
browser of the connected USB storage
device.
•
[Browse iPod] : Accesses the content
browser of the connected iPod or
iPhone.
•
[Browse PC] : Accesses the content
browser of the connected PC network.
• [Setup] : Accesses menus to change
picture, sound and other settings.
EN 11