Connect A Wi-Fi Usb Adapter; Use Your Home Theater; Before You Start; Access The Home Menu - Philips HTS9140 User Manaul

Set up network
1
Connect the home theater to a network
router through wired or wireless network
connection (see 'Connect a Wi-Fi USB
adapter' on page 11 ) .
2
Turn on your TV and switch to the correct
source for the home theater.
3
Press ( Home ).
4
Select [Setup] , then press OK .
5
Select [Network Setup] > [Network
Installation] , then press OK .
•
For wired network, select
(Ethernet)] and press OK .
• For wireless network, select
(Wi-Fi)] and press OK .
6
Follow the instructions on the TV to
complete the setup.
»
The home theater connects to the
internet. If connection fails, select [Retry] ,
then press OK .
7
Select [Finish] , then press OK to exit.

Connect a Wi-Fi USB adapter

Purchase a Wi-Fi USB adapter (model: PHILIPS
WUB1110) and set up the wireless network (see
'Set up network' on page 11 ) .
5
This section helps you use the home theater to
play media from a wide range of sources.

Before you start

Check that you:
•
[Wired
•
[Wireless
•

Access the home menu

The home menu gives you easy access to
connected devices, audio and video settings, and
other features.
1
2
Use your home
theater
Make the necessary connections described
in the Quick Start and User Manual.
Complete the À rst time setup. First time
setup appears when you turn on the home
theater for the À rst time. If you do not
complete the setup, you are prompted
to complete it each time you turn on the
home theater.
Switch the TV to the correct source for the
home theater.
Press ( Home ).
»
The home menu appears.
Press the Navigation buttons and OK to
select the following:
•
[play Disc] : Starts disc play.
•
[browse USB] : Accesses the content
browser of the connected USB storage
device.
• [browse iPod] : Accesses the content
browser of the connected iPod or
iPhone.
•
[browse PC] : Accesses the content
browser of the connected PC network.
•
[browse Net TV] : Accesses Net TV.
•
[Setup] : Accesses menus to change
picture, sound and other settings.
EN 11