Connect A Wi-Fi Usb Adapter; Connect A Wireless Module; Use Your Home Theater; Before You Start - Philips HTS9520 User Manual

Connect a Wi-Fi USB adapter

Purchase a Wi-Fi USB adapter (model: PHILIPS
WUB1110) and set up the wireless network (see
'Set up network' on page 10).

Connect a wireless module

Note
•
When you connect and switch on the wireless
module, the rear speaker connectors on the
home theater are muted, the rear surround
sound is output through the connectors on the
wireless receiver.
(Wireless module not supplied - Philips
RWSS9500)
Wireless Rear Audio
5 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.

Before you start

Check that you:
• Make the necessary connections described
in the Quick Start and User Manual.
• Complete the first time setup. First time
setup appears when you turn on the home
theater for the first time. If you do not
complete the setup, you are prompted
to complete it each time you turn on the
home theater.
• Switch the TV to the correct source for the
home theater.

Access the home menu

The home menu gives you easy access to
connected devices, audio and video settings, and
other features.
1
Press (Home).
» The home menu appears.
2
Press the Navigation buttons and OK to
select the following:
•
[play Disc] : Starts disc play.
•
[browse USB] : Accesses the content
browser of the connected USB storage
device.
•
[browse iPod] : Accesses the content
browser of the connected iPod or
iPhone.
• [browse PC] : Accesses the content
browser of the connected PC network.
•
[browse Net TV] : Accesses Net TV.
• [Setup] : Accesses menus to change
picture, sound and other settings.
•
[User Manual] : Launches the
electronic user manual.
EN
11