Map the audio input
When you connect an HDMI-CEC device to
your TV or your home theater, map the audio of
the connected device to your home theater.
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [EasyLink] > [Audio Input Mapping],
and then press OK.
4
Follow the instructions on the TV screen
to map the audio input of the connected
device.
EN
24
7
Change settings
This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already configured
with the best value for your home theater.
Unless you have a reason to change a setting, it
is best to leave it at the default value.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
BACK. To exit the menu, press
Picture
Change the picture settings to suit your preferences.
Note
•
The best setting is automatically selected for
the TV. If you change the setting, make sure
that the TV supports the new settings.
Picture settings and format
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Change the following settings, and then
press OK:
•
[TV Display]: Picture format.
•
[Picture Settings]: Predefined color settings.
Picture color
Deep Color recreates the natural world on your
TV screen and displays vivid images in over a
billion of colors.
If your TV supports Deep Color and is
connected to your home theater through an
HDMI cable, you can change the Deep Color.
1
Press
(Home).
2
Select [Setup], and then press OK.
(Home).