Table of Contents
Advertisement
Play from radio
The home theater can store up to 40 radio
stations.
1
Check that the FM antenna is connected.
2
Press RADIO .
»
"
AUTO INSTALL...PRESS PLAY ' appears
on the display panel if you have not
installed any radio stations. Press
3
Press the following buttons to control play:
Button
Action
/
Selects a preset radio station.
Searches for a radio station.
/
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for À ve
seconds to reinstall radio stations.
Note
•
AM and digital radio are not supported.
•
If no stereo signal is detected, or if fewer than
À ve stations are found, you are prompted to
install the radio stations again.
•
For the best reception, place the antenna away
from the TV or other sources of radiation.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device .
10
EN
6
This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already conÀ gured
with the best value for the home theater.
.
Unless you have a speciÀ c reason to change a
setting, it is best to leave it at the default value.
Access the setup menu
1
Press
»
Symbol
2
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
3
Press
menu, or press
Note
•
You cannot change a setting that is grayed out.
Change settings
SETUP .
The following menu appears.
Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
BACK to return to the previous
SETUP to exit.
Advertisement
Table of Contents
