Easylink - Philips HTS5131 User Manaul

Play and search buttons
Button Action
Navigation
Display the onscreen
buttons (up) keyboard.
Use the onscreen keyboard to
search for a video.
Navigation
Display the onscreen play
buttons (down) buttons.
Navigation While browsing the video
buttons (left/
playlist, select the previous or
right) next video.
Select the onscreen play
buttons to play the video.
OK
Confirm an entry or selection.
(Play) Start or resume play.
Pause play.
Stop play.
Skip to the previous or next
/
video.
/ Skip backwards or forwards
while playing video.

EasyLink

The home theater supports Philips EasyLink, which
uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
What you need
•
HDMI-CEC compliant devices.
•
An HDMI connection between the
connected devices.
Switch on
1
On the TV and other connected devices,
turn on the HDMI-CEC operations. For
details, see the manual of the TV or other
devices.
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [EasyLink] > [EasyLink], and then
press OK.
5
Select [On], and then press OK.
Control devices
Control the home theater and the other
connected HDMI-CEC compliant devices with a
single remote control.
One-touch play
If you enable One-touch play, the TV
automatically switches to the correct channel
when you play a disc in your home theater.
One-touch standby
When you press and hold
remote control, the home theater and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby
mode.
If one-touch standby is enabled on your home
theater, you can switch to standby with the
remote control of the TV or other HDMI-CEC
devices.
System Audio Control
When you play a device that has its audio
output routed to the home theater, the home
theater switches to the corresponding audio
source automatically.
To use one-touch audio, turn on System Audio
Control and follow the instructions on the TV
to map connected devices to the audio input
connectors of the home theater.
Audio Input Mapping
When you connect a new device to your home
theater, map the device to the audio input
connector (see 'Map the audio input' on page
24).
Select speaker output
Play the audio from a connected device through
your home theater.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [EasyLink] > [System Audio
Control] > [On], and then press OK.
4
Map the audio output of the HDMI TV and
other HDMI-CEC compliant devices to the
audio inputs on your home theater.
Note
•
To play the audio from the TV speakers, select
[EasyLink] > [System Audio Control] > [Off].
(Standby) on the
EN
23