Advertisement
Advertisement
Table of Contents
Related Manuals for Hans Grohe Talis S Single-Hole Lavatory Mixer with High Swing Spout 32070XX1
Summary of Contents for Hans Grohe Talis S Single-Hole Lavatory Mixer with High Swing Spout 32070XX1
- Page 1 Installation Instructions / Warranty Talis 32070XX1...
-
Page 2: Technical Data
Talis Lavatory Faucet 32070XX1 Technical Data Maximum flow rate Operating pressure: Recommended operating pressure: 14.5 - 72 psi Test pressure: Hot water temperature: Recommended hot water temp.: Hole size in mounting surface Max. mounting surface depth: 3/8” supply hoses require stops with 3/8” compression fittings (not included) *Please know and follow all applicable local plumbing codes when setting the temperature on the water heater. - Page 3 Installation Position the faucet and sealing ring in place on the mounting surface. From below the mounting surface, install the friction washer, metal washer and mounting nut. Tighten the mounting nut by hand. Tighten the tensioning screws. Install the pull rod. Connect the supply hoses to the stops with 3/8”...
-
Page 4: Install The Pop-Up Drain
Install the Pop-up Drain plunger Remove the plunger assembly. height adjuster Unscrew the drain outlet flange from the tee. flange Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to sealing gasket the flange. - Page 5 Re-set the High Temperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use the included 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions.
-
Page 6: User Instructions
User Instructions Pivot the handle out to turn the water on, in to turn the water off. Pivot the handle to the rear for warmer water, to the front for colder water. Replacement Parts handle 1.1 screw cover flange cartridge, assy seal aerator cpl. - Page 7 Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty.
- Page 8 THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: Conditions, malfunctions or damage not resulting from defects in material or workmanship. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no-rinse”...
Need help?
Do you have a question about the Talis S Single-Hole Lavatory Mixer with High Swing Spout 32070XX1 and is the answer not in the manual?
Questions and answers