Load Paper; Removing Paper; Additional Devices - Philips FAXJET 325 User Manual

Load paper

Please use only paper which is specifically intended for use
with ink cartridge printers (standard format: A4 210×297 mm,
80 g/m²). Follow the instructions of the manufacturer.
v Never load paper while the fax machine is print-
ing! Do not use paper that has already been
printed on one side! This could lead to a paper
jam.
1 Insert the paper tray in the slots provided behind
the paper feed mechanism.
2 To prevent several sheets being drawn into the
machine at once, first fan out the paper to separate
the sheets and then straighten the stack on a flat
surface before inserting it into the paper feed.
3 Pull the paper feed flap fully forward until it stops.
Insert several sheets of A4 paper up to the end-stop
in the paper feed mechanism (max. 100 sheets).
Close the paper feed flap.
8

Removing paper

To remove the paper (e.g. in case of a paper jam), open the
paper feed flap and carefully pull out the paper. Close the flap
again.

Additional devices

In addition to your fax machine, you can also connect other
devices, such as additional telephones, call-fee indicators, an-
swering machines or modems to a single telephone line. For
UK: As long as the Ringer Equivalent Number (REN value)
on the line doesn't exceed 4. The REN value of this fax is 1.
If you intend using special auxiliary devices with your fax ma-
chine, please contact your dealer.
If you wish to receive faxes via modem, you must set your fax
machine to MANUAl RECEPTION.
Same socket
(not in all countries)
You can connect additional devices to the same telephone
socket. Make sure the fax machine is the first device connected
to the line.
Connecting additional devices to the same socket ensures you
the optimal functionality of your active fax switch (e.g. call
transfer). Your fax machine can control the additional devices.