Computer Connection - Philips FAXJET 325 User Manual

Computer
connection
(only for fax machines with a PC interface)
In order to be able to use your fax machine as a printer and
scanner in conjunction with your computer, you must con-
nect it to the computer and install the software provided with
the fax machine. This includes comprehensive on-line docu-
mentation.
Requirements
For Windows 98:
®
Pentium 133 MHz or higher, at least 32 MB RAM
®
For Windows ME:
®
Pentium ® 166 MHz or higher, at least 32 MB RAM
For Windows NT, 2000 or XP:
®
Pentium II or higher, at least 64 MB RAM
®
VGA screen
parallel port: IEEE 1284 ECP
D Please use only printer cables which are complying to the
norm IEEE 1284 and must not be longer than 2 m.
D For installation, you will need about 20 MB free memory
on the hard disk.
Connection
1 Make sure that the fax machine and the computer are both
unplugged from the power supply.
2 Remove the socket cover for the printer cable.
10
3 Insert the printer cable provided with the fax machine to
the corresponding sockets of the computer and of the fax
machine.
4 Reconnect the fax machine to the mains and switch on the
computer.
Software installation
1 Close down all programs on the computer.
2 Insert the installation CD provided with the fax machine.
3 Start the program "setup.exe" on the installation CD. Fol-
low the instructions on the screen.
4 Once this is complete, re-start the computer.