Items Supplied; Intended Use; Technical Data; Characteristics - Silvercrest KH 1172 Operating Instructions Manual

Items supplied

Bread Baking Machine KH 1172
Kneading hook
Baking mould
Measuring beaker
Measuring spoon
Kneading paddle remover
Operating Instructions
Concise instruction sheet
Order card
Recipe Book

Intended use

Use your Bread Baking Machine only in domestic
areas and only for baking bread or making jams and
marmalades.
Do not use the appliance for drying foodstuffs or
other objects. Do not use the bread machine out-
doors.
Use only the ancillaries recommended by the manu-
facturer. Accessories not recommended may cause
damage to the appliance.

Technical data

Rated voltage:
Power consumption :

Characteristics

With this Bread Baking Machine you have the
possibility to bake bread according to your perso-
nal taste.
• You can choose from 11 different baking pro-
grammes.
• You can employ ready-to-use baking mixtures.
• You can knead dough for bread rolls and make
jams.
220-240V ~ 50Hz
600 Watt

Before the First Use

Disposal of the packaging material
Unpack your appliance, remove all transportation
restrainers and dispose of the packaging material
as per the current regulations for your locality.
Initial cleaning
Wipe the baking mould 4, kneading hook q and
upper surfaces of the Bread Baking Machine with
a clean moist cloth before taking it into use for the
first time. Do not use abrasive sponges or cleaning
powders. Remove the protective foil from the display
panel 7.
Pre-heating
Please take note of the following details regarding
the first usage:
Risk of fire!
Do not allow the Bread Baking Machine to warm
up for more than 5 minutes with an empty baking
mould 4. There is a real danger of it overheating.
Note:
For the first heating up ONLY, place the empty baking
mould 4 into the appliance. Close the appliance
lid 2. Select the programme Bake, as described in the
chapter "Baking bread", and press the button Start/
Stop to warm up the appliance for 5 minutes.
After 5 minutes, press the button Start/Stop
a signal tone is heard, this will terminate the procedure.
As the heating elements are lightly greased, a slight
smell may occur when first putting the appliance into
operation. This is harmless and stops after a short
time. Provide for sufficient ventilation, for example,
open a window.
Allow the appliance to cool down completely and
once again wipe the baking mould 4, kneading
hook q and the outer surfaces of the Bread Baking
Machine with a clean moist cloth.
- 4 -
until