Table of Contents
Advertisement
4 Insert the black cartridge "nose" down in
the right-hand compartment of the cartridge
holder.
5 Insert the colour cartridge in the same way
in the left-hand compartment.
6 Close the cartridge holder. You'll hear a click
when it snaps shut.
7 Close the machine.
8 Push the supplied "Plug'n'Print" starter card
with the contacts at the top into the slot under
the control panel. This "Plug'n'Print" card is
used for charging the black cartridge and the
colour cartridge.
9 Changing the cartridges may take a short
while time and is completed when the display
shows:
Action completed
Repeat the process with the same card for the
second cartridge.
Cartridge alignment
1 After inserting the cartridges for the fi rst time,
2 Enter the value A where the image is the
3 Confi rm with OK and repeat these steps for
Your name and number
1 Enter your fax number (max. twenty digits)
2 Enter your name by using the keyboard for
Time and date
Enter the date and time and confi rm with OK,
e. g. 12 05 04 16 30 OK for
May 12
PC connection
v Install the software first and then con-
Minimum configuration
Your PC must have the following minimum con-
fi guration:
•
•
•
•
Software installation
The Software-Package contains:
Remove card
1 " MF-Inkjet": installs your printer and scan-
the machine will print out a page to check
their alignment.
clearest.
values B, C and D.
and press OK (to enter a plus sign hold down
the CTRL key and press Q; to enter a blank
space, press the _@ key).
text input (max. twenty characters). You can
also enter a plus sign (CTRL and Q) or a
slash (CTRL and M). Press OK. If you have
entered a wrong digit or character, you can
correct it with / and C.
th
2004, 4:30 p. m.
nect the MF-JET via USB-cable to your PC,
when prompted to do so.
Pentium processor, 200 MHz or higher
Windows
98/2000/ME/XP and 128 MB
®
RAM
300 MB free disk space for the complete in-
stallation
USB port
ner.
enter VALUE A
enter VALUE B
9
Advertisement
Table of Contents
