Table of Contents
Advertisement
2 The position of the cartridge holder will show
you which cartridge needs to be replaced. The
arrows point to the cartridge that is empty.
3 Open the cartridge holder.
4 Remove the empty cartridge.
5 Take the ink cartridge out of its packaging
and remove the protective strip. Be careful
not to touch the nozzles and the contacts.
6 Insert the cartridge with the "nose" down into
the cartridge holder - the colour cartridge
left and the black cartridge right.
7 Close the cartridge holder. You will hear a
click when it snaps shut.
8 Close the machine.
9 Insert the chip card "Plug'n'Print" with the
contacts facing up into the slot below the
control panel to update the cartridge infor-
mation.
10 Charging the cartridges may take a short
while time and is completed when the display
shows:
Action completed
Remove card
27
Advertisement
Table of Contents
