Table of Contents
Advertisement
Scan to PC
You can use the MF-JET to scan documents and
edit the document with a PC (see Installation /
PC connection).
Inserting a document
With the MF-JET 440 you can scan documents
with the fl atbed scanner. MF-JET 500 also offers
automatic document feed.
Flatbed scanner
1 Open the fl atbed scanner cover. Please make
sure that the scanner glass is clean before
placing the original.
2 Place the document face down onto the
glass.
3 Align it with back left corner of the scanner
(marked with arrows).
If you want to scan small three-dimensional ob-
jects (such as coins or fl owers), use transparent
fi lm to protect the scanner glass.
Automatic feeder
(for machine with automatic document feeder)
Place the document face up into the document
feeder (up to 10 pages on 60–100 g/m² pa-
per).
If you are working with originals of an odd size
or photos, please use the fl at-bed scanner.
A5 size documents should be inserted landscape.
The following points are the most common
causes of problems when inserting documents
into the feeder. Do not insert ...
•
pages that are smaller than A5.
•
pages from newspapers (printer's ink).
•
stapled pages or pages with paper clips.
•
creased or torn pages.
•
wet pages or pages with corrections made
with correction fl uid; dirty pages or pages
with a glossy or laminated surface.
•
pages joined with sticky tape or glue, with
adhesive stickers such as "post-it
or pages which are too thin or too thick.
10
" notes,
®
21
Advertisement
Table of Contents
