4 Choose a fax number and press Y. Wait until
the warm-up phase has come to an end and
the document has been scanned into the
memory.
5 If you want to send just one page, use / to
choose DONE and press OK. If you want to
scan further pages, choose NEXT PAGE and
insert another page. Then press OK.
After transmission, the MF-JET will automati-
cally print a transmission report.
If you want to cancel the transmission, press X
twice.
Automatic feeder
(for machine with automatic document feeder)
If you are working with originals of an odd size
or photos, please use the fl at-bed scanner.
A5 size documents should be inserted landscape.
The following points are the most common
causes of problems when inserting documents
into the feeder. Do not insert ...
•
pages that are smaller than A5.
•
pages from newspapers (printer’s ink).
•
stapled pages or pages with paper clips.
•
creased or torn pages.
•
wet pages or pages with corrections made
with correction fl uid; dirty pages or pages
with a glossy or laminated surface.
•
pages joined with sticky tape or glue, with
adhesive stickers such as “post-it
” notes,
®
or pages which are too thin or too thick.
1 Place the document face up into the docu-
ment feeder (up to 10 pages printed on
60–100 g/m² paper).
10
2 Dial the fax number.
3 Press Y to start the transmission.
After transmission, the MF-JET will automati-
cally print a transmission report.
If you want to cancel the transmission, press X
Page 16
twice.