Desktop Charger - Philips GENIE 2000 User Manual

Desktop charger

Connecting the
charger to the
desktop charger
1
Insert the charger plug
into the connector.
2
Push the flex into the
connector at the back of
the desktop charger.
Charging the
phone's battery
1
Press the release button
to open the cradle.
2 Insert the phone in the
opened cradle.
3
Push the phone back-
wards until the cradle
locks.
4
In the locked position, the
phone charges.
5
LED red = fast charging
LED green = trickle char-
ge then charged.
6 Press the release button
to open the cradle.
7 When the cradle is open,
remove the phone.
L IMPORTANT NOTE:
When the phone is put into the cradle for charging and an extra battery is put on the slot on the desktop
charger, the telephone's battery is fully charged first (LED is green), and then the spare battery is charged after
(LED starts red, when charging completed LED is green).
When the cradle is in the closed position, do not attempt to remove the phone or insert it in the desktop
charger.
58
2
2
3
1
4
5
6
7
Accessories
1
1
2
3
5
4
Charging an
additional battery
1 Insert the battery in the
slot on the desktop
charger.
2
Clip on the battery.
3
LED red = fast charging
LED green = trickle charge
then charged.
4
Slide the release button
forward.
5 Remove the battery.